Cara Upgrade Firmware Fibocom L850 GL & L860 GL

Radenku.com – Upgrade Firmware Fibocom L850 GL & L860 GL tidak semua memerlukannya, jika modem kalian sudah berjalan normal maka tidak perlu dilakukan upgrade firmware. Lain kasusnya jika modem Fibocom kalian mengharuskan untuk upgrade firmware atau hanya sekedar ingin mencoba firmware baru.

Disini aku coba buatkan tutorial untuk upgrade firmware Fibocom L860 GL dan L850 GL.

1. Pengalaman dengan Fibocom L860 GL & L850 GL

Dari pengalamanku membeli modem Fibocom L850 GL & L860 GL tidak semua bisa langsung dipakai di router. Dari kasus modem tidak bisa detek SIM, masuk ke flash loader & tidak bisa konek sama sekali. Walapun begitu semua modul tersebut masih bisa berjalan normal.

Berikut beberapa pengalaman aku dengan Fibocom L850 GL & L860 GL.

Untuk kasus pertama Fibocom L860 GL waktu itu tidak bisa baca SIM sama sekali, sudah aku coba dengan kartu SIM & adapter berbeda tetap tidak bisa. Di cek menggunakan AT Command AT+CIMI selalu error. Aku coba flash modemnya dengan berbagai versi firmware, dari 25 firmware yang aku coba ternyata hanya bisa di 2 firmware saja yang berjalan dengan normal. Selain 2 firmware itu modulenya tidak bisa membaca SIM sama sekali.

Kasus kedua sama Fibocom L860 GL pas datang modemnya dipasang di Windows tidak terdetek. Setelah di cek ternyata terdetek USB Composite & USB Flash Loader utility. Dan di openwrt tidak terdetek cdc_acm & cdc_ncm jadi sama sekali tidak bisa dipakai. Setelah aku coba flash firmware ternyata modem bisa kembali normal.

Kasus ketiga di Fibocom L850 GL, ini datang dengan seperti normal, bisa kebaca di Windows maupun openwrt, SIM juga kebaca akan tetapi tidak bisa terkoneksi dengan internet. Kukira tadinya malasah IMEI, tetapi setelah aku cek imeinya ternyata sudah di whitelist dan sinyal pun ada. Dan sekali lagi aku coba modem Fibocom L850 aku coba flash dengan firmware terbaru ternyata bisa fix masalahnya.

Jadi kesimpulannya jika modem Fibocom kalian bermasalah mungkin saja coba dengan upgrade firmwarenya masalah akan teratasi.

2. Firmware Fibocom L850 GL & L860 GL

Sebelum flash firmware upgrade Fibocom L850 GL & L860 GL perlu disiapkan file berikut.

  • Secureboot.fls
  • Generic_cust.fls atau row_cust.fls

Untuk firmware Fibocom L850 GL dan L860 GL dibawah

Perlu di catat, untuk beberapa versi firmware untuk Fibocom L850-GL tidak terdapat frekuensi B40 (2300MHz).

Jika kalian mau mencari sendiri versi lain bisa didapat dari

Fibocom L860-GL

Fibocom L850-GL

Untuk firmware tersebut masih berupa file cab atau exe installer windows, harus terlebih dahulu agar bisa diinstall menggunakan Intel platform tool.

Extract file cab menggunakan winrar, jika file exe menggunakan innoextract.

innoextract-windows-fibocom-l850-gl-l860-gl

Setelah filenya diextract cari file M2_7560_NAND.flz untuk Fibocom L860 dan M2_7360_NAND.flz untuk Fibocom L850.

Lalu extract lagi file tersebut sampai mendapatkan file Secureboot.zip, lalu unzip.

Tinggal ambil file Secureboot.fls & row_cust.fls / generic_cust.fls.

Jika ada pas di unzip terdapat beberapa firmware, maka buka package_info.xml cari firmware yang terdapat generic_cust / row cust.

<Carrier id="1" ver="18600.5001.00.35.01.57_5003.06.001.005">
	<FWImage file="18600.5001.00.35.01.57_5003.06_Secureboot.fls"  ver="18600.5001.00.35.01.57"></FWImage>
	<CustPack file="row_cust.001.005_signed.fls" ver="001.005"></CustPack>
</Carrier>
Firmware Fibocom L850 GL & L860 GL

Karena Fibocom L850 & L860 GL ini ada banyak seperti HP, Lenovo, Dell, dll. Firmwarenya pun banyak versinya, berikut contoh beberapa versi vendor bisa cek melalui

AT+GTPKGVER? 
AT+GTPKGVER?
+GTPKGVER: "18600.5001.00.35.01.46_5001.03.001.005"

OK

18600.5001.00.x.x.x_5001.01_Secureboot.fls Cust:Custpack_HP.fls
18600.5001.00.x.x.x_5001.03_Secureboot.fls Cust:Custpack_HP.fls
18600.5001.00.x.x.x_5003.06_Secureboot.fls Cust:Custpack_THINKPAD.fls
18600.5001.00.x.x.x_5005.06_Secureboot.fls Cust:Custpack_THINKPAD_C.fls
18600.5001.00.x.x.x_5006.03_Secureboot.fls Cust:Custpack_DELL.fls
18600.5001.00.x.x.x_5022.05_Secureboot.fls Cust:Custpack_SAMSUNG.fls
18600.5001.00.x.x.x_5026.01_Secureboot.fls Cust:Custpack_LENOVO_ZEUS.fls
18600.5001.00.x.x.x_7003.07_Secureboot.fls Cust:Custpack_LENOVO_LINUX.fls

3. Cara Upgrade Firmware Fibocom L850 GL & L860 GL

Sebelum langsung upgrade firmware Fibocom L850 GL & L860 GL. Kita cek terlebih dahulu versi firmware yang terpasang sekarang, menggunakan AT Command

AT+GTPKGVER? 
AT+GTPKGVER?
+GTPKGVER: "18500.5001.00.05.27.16_5005.11"

OK

Install Driver Fibocom, Intel platform flash tool modem & siapkan firmwarenya. Pastikan firmware sesuai dengan modem L850 GL atau L860 GL, karena berbeda.

Siapkan file firmware secureboot.fls & generic_signed.fls/row_cust.fls

Buka Intel platform flash tool, setting sebagai berikut:

  • Use case: Download to flash device
  • Type: USB
  • Port: Auto detect
  • Erase Mode: No erase (jika pilih full erase maka no IMEI & NV akan hilang)
  • Log level: Debug

Setelah itu masukkan 2 file firmware secureboot.fls & generic_cust.fls.

Sekarang tinggal flash firmwarenya, klik Start to Flash, karena modem Fibocom tidak otomatis reboot maka lakukan manual, cabut dan colok lagi modemnya. Tunggu sampai flash success.

fibocom l850-gl firmware update

Kalau flash sukses, bisa cek lagi menggunakan AT Command

AT+GTPKGVER? 
AT+GTPKGVER?
+GTPKGVER: "18500.5001.00.05.27.16_5001.05.001.033"

OK

Opsional jika modem ketika flash masuk ke FCC Lock, ketika cek menggunakan AT command AT+CFUN? respon 4 dan AT+CFUN=1 tidak bisa ke angka 1, atau bisa cek menggunakan AT Command.

at@nvm:fix_cat_fcclock.fcclock_mode?

Untuk unlock FCC tinggal masukkan kedua AT Command berikut.

at@nvm:fix_cat_fcclock.fcclock_mode=0
at@store_nvm(fix_cat_fcclock)

Demikian cara upgrade firmware Fibocom L850 GL & L860 GL, semoga bisa membantu teman-teman yang masih kesulitan untuk upgrade firmware Fibocom L850 GL & L860 GL, jika dirasa bermanfaat silakan share postingan ini.

41 pemikiran pada “Cara Upgrade Firmware Fibocom L850 GL & L860 GL”

  1. Mas nanya untuk file M2_7560_NAND.flz itu untuk L850 atau l860 ya?
    saya download dari lenovo untuk l860 isinya M2_7560_NAND.flz
    kalau download dari lenovo untuk l850 usinya M2_7360_NAND.flz

    Balas
  2. Om Nugroho, utk file Secureboot.fls & row_cust.fls
    bisa langsung pakai hasil download file 18600.5001.00.35.01.57_5026.01? utk yg L860
    Enggak perlu extract M2_7560NAND.flz lagi.
    Terimakasih

    Balas
  3. Om mau tanya pas saya cek modem saya versi nya “18600.5001.00.35.01.14”
    Itu dari vendor mana ya? Soalnya ane mau upgrade FW nya bingung karna ga di tutor om

    Balas
  4. Om Nugroho kalau at command berikut
    at@nvm:fix_cat_fcclock.fcclock_mode?
    at@nvm:fix_cat_fcclock.fcclock_mode=0
    at@store_nvm(fix_cat_fcclock)
    Kok enggak bisa ya? Saya pakai putty.

    Harus pakai tools apa? atau ada settingan tertentu?

    Balas
  5. Hi radenki.com,

    Thank You very much for this Fibocom L850gl / l860gl tutorual for firmware flashing.
    Just purchased one of these. Really struggling with it. I done some AT commands and now the modem reboots a couple time after plugged in,, and then disappears. Have spent several hours trying to figure what is going on. After plugging in i have the /dev/ttyACM# ports,,,3,,,for about 15 seconds only,,then they are gone,
    From reseraching it appears something to do with FCC unlocak,,but found a script that is supposed to lock into FCC liock.
    The script appears to run succefully,,,but modem is still rebooting then disappears. Many messages in dmesg saying about ‘will not accept new address”?
    Ideas?

    Thank You

    Balas
  6. Hi sir,

    thank you for your excellent tutorial. Because of this I decided to buy the L860 at Aliexpress.

    Can you confirm that these AT commands also work for the latest firmware version of L860 and not only for L850?

    at@nvm :fix_cat_fcclock.fcclock_mode=0
    at@store _nvm(fix_cat_fcclock)

    I can’t find them in the official L860 documentation. On internet I see them for L850. They work depending on firmware version [ https://github.com/xmm7360/xmm7360-usb-modeswitch/issues/23#issuecomment-570535065%3E ].

    Also some advice to users of these Fibocom modems. They use a lot of power.
    If you experience random reboots of your modem, consider powering the modem with a USB Y cable and a 5V charger with 2-3A output.

    Balas
  7. bang flash failed ini lognya ?

    03/14/23 10:13:55.576 DEBUG : [Port -1] -> Please reboot your phone device Process time was 30.0 sec.
    03/14/23 10:14:25.731 DEBUG : [Port -1] Error> USB Boot Timeout
    03/14/23 10:14:25.731 DEBUG : [Port -1] Library Error: IMCDownload.cpp:507 – USB Boot Timeout (1)
    03/14/23 10:14:25.807 ERROR : [Port -1] Command `”C:\Program Files (x86)\Intel\Platform Flash Tool Modem\x64\DownloadTool.exe” “-c” “USB1” “–boot-timeout” “30000” “–comm-timeout” “30000” “–library=C:/Program Files (x86)/Intel/Platform Flash Tool Modem\x64\DownloadTool.dll” “–verbose” “1” “-dALL” “E:/fibocom/18600.5001.00.35.01.51_5026.01_Secureboot.fls” “E:/fibocom/row_cust.001.005_signed.fls”` failed
    03/14/23 10:14:25.807 ERROR : [Port -1] Flash failed (Command type: FLS)

    Balas
  8. Mas gimana cara mengatasi fibocom l860 pas di stb open wrt di bagian provider failed to conned retrying

    Padahal SIM imsi sudah kebaca

    Kalo bisa minta juga no wa nya mas buat di remote
    Terima kasih

    Balas
  9. Bagaimana cara mengatasi fibocom l860 yang di modem info provider nya (failed to connect retrying

    Padahal imsi sudah kebaca

    Kalo ada wa kirim mas buat bantu remot

    Balas
  10. Hello sir,

    I’ve had the L860 with your Rooter software of 8-8-22 on Raspberry Pi 4B working well since Feb 23.

    But since a few days the router lost connection with the com port of the modem after 2 min of first modem connect. Internet connection is still OK.

    The modem debug info reads like this:
    ———-
    Sat Jun 17 09:02:29 2023 : /dev/ttyUSB82 AT+CPMS=”SM”,”SM”,”SM”
    +CPMS: 0,20,0,20,0,20
    OK

    Sat Jun 17 09:04:43 2023 : /dev/ttyUSB82
    TIMEOUT ERROR
    TIMEOUT ERROR
    ———-

    The system log nor the kernel log does not report this event:

    —————-
    Sat Jun 17 09:01:36 2023 user.notice internet-detector[5058]: Internet connected
    Sat Jun 17 09:01:36 2023 user.notice sms process: SMS Supported Modem1
    Sat Jun 17 09:02:20 2023 user.notice sms process: Reread SMS Messages on Modem 1
    Sat Jun 17 09:09:39 2023 user.notice sms process: Reread SMS Messages on Modem 1
    ————
    [ 89.870148] cdc_ncm 1-1.4:1.6 eth1: 480 mbit/s downlink 480 mbit/s uplink
    [ 89.875831] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    —————–

    I checked the filesystems. All seems OK. All services are started up.
    A power toggle will restart the modem and the com port connection will work for the 2 minutes.

    Any clue sir? Do I need to suspect the Pi [sd card?] or the L860 modem?

    Thank you

    Balas
    • Found the cause of this timeout error issue.

      In menu Modem / SMS messaging, if you tick the option “Enable SMS transfer from modem to SIM”, then you will get timeout errors on the NCM comm port.
      Then you cannot view the Network status of your modem.

      I don’t know if this issue is related to a bug in ROOter or related to L860.
      At least we know how to prevent this issue.

      Balas
  11. Benar Gila Fibocom L860 Gl untuk pc Hp aku kumpulkan kode 5001. Dari 25 firmware hanya 3 yang bisa baca kartu & harus ganti imei (aku pakai cmd) akhirnya setelah 1 minggu berhasil.

    Balas
  12. pengalaman saya selama 1 minggu Fibocom L860 GL yang versi HP…dengan ciri 5001…dari microsoft dengan beberapa versi dari 25 firmware, hanya 3 versi (bisa baca kartu) yang ada “generik” bukan “raw” yang bisa jalan. kemudian cek imei tidak terdaftar & saya rubah imei dengan CMD (software change imei dapat github) dan Alhamdulillah bisa jalan mesti di baca STB openwrt harus menunggu 1 sd 2 menit.

    Balas
    • cara upgrade fw nya gmn gan, yg mn versi nya, kebetulan punyaku juga versi hp 500, itu selalu retart mlu udh pakai ext power supply juga 5V 2a, dan kalo mw update juga ga bsa selalu error di intel flash nya,

      “ERROR : [Port -1] Command `”C:\Program Files (x86)\Intel\Platform Flash Tool Modem\x64\DownloadTool.exe” “-c” “USB1” “–boot-timeout” “30000” “–comm-timeout” “30000” “–library=C:/Program Files (x86)/Intel/Platform Flash Tool Modem\x64\DownloadTool.dll” “–verbose” “1” “-dALL” “F:/18600.5001.00.35.01.57_5026.01_Secureboot.fls” “F:/row_cust.001.005_signed.fls”` failed
      08/14/23 11:57:49.254 ERROR : [Port -1] Flash failed (Command type: FLS)”

      gmn ya udh muter” ga nemu juga solve nya, ada wa ga bang??

      Balas
      • ngak cocok firmwarenya pengalaman untuk merk HP L860 GL aku pakai yang tahun 2018 cari yang ada “generik” nya bukan “raw”.
        “F:/18600.5001.00.35.01.57_5026.01_Secureboot.fls” seharusnya cari yang 18600.5001.00.xx.xx.xx_5001.01 & yang ada generiknya thn 2018. kalaupun mau yang raw xxx001.011. & kalau mau ganti imei saya pakai cmd penjelasanya & filenya ada di Github.

        Balas
  13. как восстановить имей fibocom l850-gl поле прошивки на свежую версию прошивки?

    Balas
      • bang aku coba L850 versi lama 18500.5001.00.04.26.06 = 18500.5001.00.04.26.06_5001.05_Secureboot.fls
        Generic_cust.001.018_signed.fls
        kok lebih cepat & responsif baca kartu
        kecepatan bisa tembus 42 mbps sd 50 mbps itu siang hari jam 10.00 wib kalau malam 50 mbps sd 70 mbps.
        apakah versi yang lama lebih bagus ??

        Balas

Tinggalkan komentar